Oki Teriostar LP-1030 - Page 131

131
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
Setup Items in PDL Settings Menu
When the paper number is identied as the Paper Position, the paper is supplied
as follows.
Paper Number Paper Supply
0
Disables the paper number and supplies paper according to the
touchpanel's Paper Supply Mode setting.
1 Supplies paper with identifying the Paper Supply Mode as Roll 1.
2 Supplies paper with identifying the Paper Supply Mode as Roll 2.
3 or higher Supplies paper with identifying the Paper Supply Mode as Roll 1.
When the paper number is identied as the Paper Position, the paper is supplied
as follows.
Paper Number Paper Supply
0
Disables the paper number and supplies paper according to the
touchpanel's Paper Supply Mode setting.
1 Prints with plain paper.
2 Prints with tracing paper.
3 Prints with lm.
4 or higher Supplies paper with identifying the Paper Supply Mode as Roll 4.
Note

The settings are valid only with the application compatible with the paper
numbers above.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5