Oki Teriostar LP-1030 - Page 49

49
T
Replacing the Roll Paper
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
Caution

Be careful not to injure yourself on the cutter.
Note

After closing a roll paper drawer, do not open it again until the Warming
up… (Warming-up counter) message disappears.
TIP

When you set a roll paper of a dierent type or series, press Paper on
the supply paper error screen. Set the type and the series of the new
paper roll on the paper setting popup screen which appears.
7
Close the roll paper drawer.
Slowly push in the drawer for roll 1, or the drawer
for roll 2. (It takes about 30 seconds for the paper
feeding to get ready.)
When the Printer contains the jobs to be
completed, the printing is started.
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5