Oki Teriostar LP-1030 - Page 92

92
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu
y
IPv6 Connection
Sets whether to use IPv6 connection.
<Parameter by selecting options>
n
: Default value
n
O IPv6 is not used. Set this parameter to O when using
only IPv4 connection.
On IPv6 is used.
y
IPv6 Address Manual Setting
Sets whether to set manually the IPv6 address on the Printer.
<Parameter by selecting options>
n
: Default value
n
O The IPv6 address is not set manually on the Printer. The
address is generally not set manually in environments
with automatic IPv6 address conguration.
On The IPv6 address is set manually on the Printer.
y
IPv6 Address
Sets the IPv6 address when IPv6 Address Manual Setting is On.
<Parameter by entering characters in IPv4/IPv6 format>
0 to 63 characters
y
Prex Length
Sets the prex length when IPv6 Address Manual Setting is On.
<Parameter by entering numbers>
0 to 128 Default value: 64
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5