Oki Teriostar LP-1030 - Page 93

93
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu
y
DHCPv6
Set the options when the Printer is installed in an environment with automatic IPv6
address distribution from the DHCP server.
<Parameter by selecting options>
n
: Default value
n
RA The IPv6 address is obtained automatically using RA
(router advertisement). This is the parameter generally
used.
On The IPv6 address is forcibly obtained from the DHCP
server.
O The IPv6 address is not automatically obtained from the
DHCP server.
z
Routing Table
Sets the routing table for the Printer. This is used when connecting the Printer with
a host on a dierent network.
y
Gateway Address 01 to 10
Sets the IP address of the router.
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255 Default value:
0.0.0.0 (not set)
y
Network Address 01 to 10
Sets the network address.
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255 Default value:
000.000.000.000 (not set)
z
The gateway address set to 000.000.000.000 species the default routing
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5