Oki Teriostar LP-1030 - Page 95

95
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255 Default value:
000.000.000.000
The default value indicates that no IP
address is registered, which is the same
as the trap O.
y
Error
Species a trap to be sent at an error related to the engine. However, the error does
not include the technical call errors.
The destination to send the trap at an error is the trap agent computer set in the
previous item, TRAP ** Agent Computer.
However, note that this setting is disabled even if set to On when the TRAP Agent
Computer is not specied.
<Parameter by selecting options>
n
: Default value
n
On
O
y
Job
Species a trap to be sent when a print job is completed. When this parameter is
not set to O, the trap condition is specied with TRAP**:IP address or TRAP**:IP
operation.
<Parameter by selecting options>
n
: Default value
n
O
On by IP Address
On by Port
y
IP Address
Enabled when On by IP Address is selected in operation TRAP ** job. The setting
can be changed. If the IP address specied here matches the IP address of the job
transmission destination host, a trap is sent to the TRAP Agent Computer. Note that
when this setting is 000.000.000.000, a trap is sent for all the received jobs.
<Parameter by entering numbers>
000.000.000.000 to 255.255.255.255 Default value:
000.000.000.000
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5