Oki Teriostar LP-1030 - Page 96

96
LP-1030/LP-1030-MF User's Manual for Basic Printer Operation
T
System Menu
y
Port
Enabled when On by Port is selected in operation TRAP ** job. The setting can also
be enabled. After printing is completed, a trap is sent to the TRAP Agent Computer
for all jobs sent to the Printer port that is specied here.
<Parameter by selecting options>
n
: Default value
n
All
Port 01 to 10
z
ActiveDirectory Settings option available only in Japan
y
DC Addresses 1 to 3
y
DC Access Login Name
y
DC Access Password
Note

Do not change these settings.
The printer may not operate correctly if these settings are changed.
n
Scanner
MF
z
TWAIN Port Address
Sets the command port (TCP) for TWAIN driver connection.
<Parameter by entering numbers>
0 to 65535 Default value: 30000
z
TWAIN Data Port Address
Sets the data port (TCP) for when the TWAIN driver is used for connection.
<Parameter by entering numbers>
0 to 65535 Default value: 32000
Before Use Basic Operations Menu Functions
Authentication
function
Troubleshooting Appendix
Chapter
Chapter
Chapter
Chapter
Chapter
1
2
3
4
5