Highlight an option using the FG buttons and press the OK button.
Press I to set the detailed options for the selected picture mode. Detailed options are not
available for some picture modes.
Sharpness The outlines are enhanced to give the image a sharp, clear look.
Contrast
Adjust the difference between light and dark in the image.
Accentuating the difference between light and dark can give the
image a clear and powerful impression.
Saturation
Adjust the hues and color intensity of the image. Increasing the
saturation produces an impactful image with clear tones.
Gradation
Adjust the hues and color intensity of the image. The overall image
is brightened or darkened according to the impression of the subject.
Both dark and light tones can be produced according to the contrast.
Color Filter
Color filter effects can be added to the [Monochrome] setting
in Picture Mode. The subject can be brightened, or the contrast
sharpened depending on the color. Contrast is sharpened in the order
of yellow, orange, and red. Green is effective for portrait photography.
Monochrome
Color
Color effects can be added to the [Monochrome] setting in Picture
Mode.
Effect
Configure the intensity of the effect applied when Picture Mode is set
to [i-Enhance].
Add Effects Art filters also allow you to set up frame effects and other effects.
Changes to contrast have no effect when settings other than [Normal] are used.
124
Processing options (Picture Mode)
2.
C
To Next Page
Loading...
Need help?
General
