The histogram, Highlight & Shadow, and level gauge displays can
be added to [LV-Info]. Select [Custom 1] or [Custom 2] and select
the displays you wish to add. The added displays are can be viewed
by repeatedly pressing the INFO button during shooting. You can
also opt to not show displays that appear at the default setting.
Custom1
Highlight&Shadow
Level Gauge
Back
LV-Info (Shooting information displays)
Choose the info shown in the live view shooting display. g“Switching the information display” (P.33)
Level gauge display
The orientation of the camera is indicated. The “tilt” direction is indicated on the vertical bar and the
“horizon” direction on the horizontal bar. The camera is level and plumb when the bars turn green.
Use the indicators on the level gauge as a guide.
Error in the display can be corrected via calibration (P.154).
157
Adding information displays using the INFO
button (G/Info Settings)
To Next Page
Loading...
Need help?
General
