Press the A button (I).
Using flash (flash photography)
You can use flash when shooting.
Highlight a flash mode using HI or the control dial and press the OK button.
AUTO
Flash Auto
The flash fires automatically in dim or backlit
conditions.
A
Fill In The flash fires regardless of lighting conditions.
e
Red-eye The flash fires to reduce the red-eye phenomenon.
B
Flash Off The flash does not fire.
f
Slow Synchronization
+ Red-eye
Slow synchronization is combined with red-eye
reduction flash.
g
Slow Synchronization
(1st Curtain)
The flash fires with slow shutter speeds to brighten
dimly-lit backgrounds.
h, i,
etc.
Manual Value
Control flash output manually. If you highlight
[Manual Value] and press the INFO button before
pressing the OK button, you can adjust flash output
using FGHI or the control dial.
j
Remote Control
The dedicated underwater flash or wireless RC flash
is used to take pictures. For details, refer to “Taking
pictures with the Wireless RC Flash System” (P.236).
k
LED On
The LED illuminator turns on when a picture is
taken. This is effective for taking close up pictures.
64
Using flash (flash photography)
1.
2.
To Next Page
Loading...
Need help?
General
