OM SYSTEM IM032 User Manual

Sequential shooting/using the self-timer
Adjust settings for burst or self-timer photography. Choose an option according to your subject.
Secure the camera firmly on a tripod for self-timer shooting.
Press the gY (G) button.
Highlight an option using HI or the control dial.
F
Single One frame is taken at a time when the shutter button is pressed.
i
Sequential
High
Hold the shutter-release button all the way down to take a series of
photographs.
To select a frame advance rate, highlight [Sequential High] and
press the INFO button before you press the OK button. Select
from frame advance rates of approximately 10 frames per second
(10fps) or 20frames per second (20fps). Use FGHI or the
control dial to highlight a frame advance rate and press the OK
button to select.
Flash is disabled.
h
Sequential
Low
Pictures will be taken at about 5 fps while the shutter button is
pressed all the way down.
j
Self-timer
12sec
Press the shutter button halfway to focus, then all the way down to
start the timer. First, the self-timer lamp lights up for approximately
10 seconds, then it blinks for approximately 2seconds, and then the
picture is taken.
k
Self-timer
2sec
Press the shutter button halfway to focus, then all the way down
to start the timer. The self-timer lamp blinks for approximately 2
seconds, and then the picture is taken.
l
Custom Self-
timer
Press the INFO button to set [Y Timer], [Number of Frames], and
[Interval Length]. Use HI to highlight items and FG to select a
value. Focus, exposure, and white balance are fixed at the values for
the first shot of each series.
60
Sequential shooting/using the self-timer
C
C
1.
2.

OM SYSTEM IM032 Specifications

General

Brand	OM SYSTEM
Model	IM032
Category	Digital Camera
Language	English