s
Pro Capture
Sequential shooting begins when you press the shutter button
halfway. Press the shutter button all the way down to begin
recording captured images to the card, including those captured
when the shutter button was pressed halfway. Focus, exposure,
and white balance are locked at the values for the first shot of
each series. g“Shooting without a release time lag (Pro Capture
shooting)” (P.62)
Flash is disabled.
Press the OK button.
During sequential shooting, if the battery level icon blinks due to low battery, the camera stops
shooting and starts saving the pictures you have taken on the card. The camera may not save all of
the pictures depending on how much battery power remains.
If you stand in front of the camera to press the shutter button when using the self-timer, the picture
may be out of focus.
When you are using h, live view is displayed. In i mode, the shot immediately preceding the
current frame is displayed.
To cancel the activated self-timer, press the MENU button.
Self timer is not canceled automatically after shooting.
61
Sequential shooting/using the self-timer
C
3.
C
B
B
B
B