Rotate the mode dial of the remote control to K or n.
Press the shutter button on the remote control to take pictures.
Shooting from the remote control
Before establishing a wireless connection between the camera and remote control, confirm that
[Onr] is selected for [Bluetooth] (P.176). When set to [Onr], r appears in the display and the
camera will be on standby for wireless communication with the remote control as soon as it is turned
on.
When the mode dial of the remote control is set to K (still photography mode): When you
lightly press the shutter button of the remote control down to the first position (press the
shutter button halfway), the AF confirmation mark (N) will be displayed, and a green frame
(AF target) will be displayed in the focus location.
When the mode dial of the remote control is set to n (movie recording mode): When you
press the shutter button of the remote control, movie recording starts. Press the shutter
button of the remote control again to stop movie recording.
188
Shooting from the remote control
1.
2.
To Next Page
Loading...
Need help?
General
