OM SYSTEM IM032 User Manual

Connecting the Camera to a Computer
Connecting the Camera to a Computer
32
1
USB connector (Type-C)
USB cable (supplied)
USB port
When the camera is connected to a computer via USB, a dialog should be displayed in the monitor
prompting you to select a host.
The battery can be charged while the camera is connected to the computer via USB. The charging
time varies depending on the performance of the computer. (There may be cases in which it takes
approx. 10 hours.)
If nothing is displayed on the camera screen even after connecting the camera to the computer, the
battery may be exhausted. Use a fully charged battery.
Data transfer is not guaranteed in the following environments, even if your computer is equipped
with a USB port.
Computers with a USB port added by means of an extension card, etc., computers without a
factory-installed OS, or home-built computers
Camera controls cannot be used while the camera is connected to a computer.
If the computer does not detect the camera, disconnect the USB cable and then reconnect it to the
computer.
182
Connecting the Camera to a Computer
1
2
3
C
C
C
-
C
C

OM SYSTEM IM032 Specifications

General

Brand	OM SYSTEM
Model	IM032
Category	Digital Camera
Language	English