Using GPS
Any of the following enable GPS:
Rotating the LOG switch to LOG (P.203), setting [Record GPS location] (P.153) to [On], setting
[Auto Time Adjust] in [m Settings] (P.139) to [On]
Do not cover the GPS antenna (P.15) with your hands or metal objects.
If you are using the GPS function for the first time and the A-GPS has not been updated, or if the
function has not been used for a long time, it may take a few minutes for the position measurement
to end.
If the GPS icon is displayed, GPS information is being acquired. It indicates that some error has
occurred when the icon is shown in red. Contact our service center if the error persists after the
camera is turned off and on.
202
Using GPS
C
C
B
To Next Page
Loading...
Need help?
General
