Press the shutter button all the way down to start shooting.
The camera configures the proper settings automatically and starts shooting.
After pressing the shutter button, there is a time lag until shooting starts.
The composite image will be displayed at regular intervals.
Press the shutter button again to stop shooting.
View the changing result in the monitor and press the shutter button to end shooting once
the desired result is achieved.
The maximum recording length of one shot is 3 hours.
[Panorama]: Shooting a panorama
Rotate the mode dial to SCN.
Highlight [Scenery] using FGHI or the control dial and press the OK button.
Highlight [Panorama] using HI or the control dial and press the OK button.
Press the shutter button to shoot the first frame.
Pan the camera slowly to frame the second shot.
A target mark will be displayed.
47
Shooting in scene mode (SCN mode)
5.
6.
1.
2.
3.
4.
5.