OM SYSTEM IM032 - Connecting the Camera and Remote Control; Wireless Connection

When a message is displaying
stating that pairing is in
progress, rotate the mode
dial on the remote control to
CONNECT and keep it in this
position.
Wireless Shutter Setting
r
Pairing is complete.
Bluetooth setting is changed to On
r
.
Close
AA:BB:CC:DD:EE:FF
Connecting the camera and remote control
Wireless connection
For wireless connection, you must pair the camera and the remote control first.
Highlight [Wi-Fi/Bluetooth Settings] in the e Setup Menu and press I.
Highlight [Wireless Shutter Setting] and press I.
Highlight [Start Pairing] and press the OK button.
Pairing starts when it is kept in this position for 3seconds. Keep it in the CONNECT position
until pairing is complete. If you rotate the mode dial before it is complete, the data transfer
indicator flashes rapidly.
The data transfer indicator lights when pairing starts.
186
Connecting the camera and remote control
1.
2.
3.
4.