After selecting [J], [K], [L], or [M] (One Touch WB 1,
2, 3, or 4), press the INFO button.
One Touch WB
White balance is measured by framing a piece of paper or other white object under the lighting that
will be used in the final photograph. This is useful when shooting a subject under natural light, as well
as under various light sources with different color temperatures.
The One Touch WB screen appears.
Photograph a piece of colorless (white or gray) paper.
Frame the piece of paper so that it fills the display. Ensure that it is free of shadows.
Highlight [Yes] and press the OK button.
The new value is saved as a preset white balance option.
The new value is stored until One Touch WB is measured again. Turning the power off does
not erase the data.
77
Adjusting color (white balance)
1.
2.
3.
To Next Page
Loading...
Need help?
General
