Press and hold the INFO button.
Release the button when the LED illuminator lights up.
The illuminator will light up even if the camera is off.
Using the LED illuminator
Unlike the flash, which lights up only briefly, the LED illuminator stays lit for longer periods. It can also
serve as a flashlight.
Turning the LED illuminator on
If the camera is on
The LED illuminator will remain lit for up to around 90 seconds while camera controls are in use, or up
to 30 seconds if no operations are performed.
The LED illuminator can be used during movie recording. It cannot, however, be used to film 4K
movies.
If the camera is off
The LED illuminator will remain lit for up to around 30 seconds, whether or not you attempt to operate
camera controls.
The LED illuminator turns off automatically if you:
press the ON/OFF button,
use the LOG switch,
display the menu,
connect or disconnect a USB cable, or
connect to a Wi-Fi network.
67
Using the LED illuminator
1.
2.
-
-
-
-
-