Move the camera slowly so that the pointer and the target
mark overlap. The camera releases the shutter automatically
when the pointer and the target overlap.
To combine images from left
to right
Target mark
Pointer
1
2
Press the OK button to combine only the two frames.
Repeat step 5 to take a third frame. The camera automatically combines the frames into a single
panorama image.
To cancel the panorama function, press the MENU button.
Focus, exposure, and other settings are fixed at the values in effect at the start of shooting.
If you press the OK button or press the shutter button again before panning the camera to move
the target over the pointer, shooting will end and a panorama will be created from the frames shot
to that point.
48
Shooting in scene mode (SCN mode)
6.
7.
B
B
To Next Page
Loading...
