The [Image Review] (P.139) option in the eSetup Menu functions with a display time of
0.5seconds.
If the time until shooting or the shooting interval is 1minute 31seconds or longer, the monitor will
go dark and the camera will enter sleep mode if no operations are performed for 1minute. The
display will turn on automatically 10seconds before shooting for the next interval begins. It can also
be reactivated by pressing the ON/OFF button at any time.
No time lapse movie will be created if any frame is not recorded correctly.
If there is insufficient space on the card, the time lapse movie will not be recorded.
If there is not enough charge left on the battery, the shooting may end partway through. Use fully
charged batteries, or use the USB-AC adapter to shoot for longer periods of time. If you are using
the USB-AC adapter, insert the battery in the camera and select [Charge] in the dialog displayed
after the USB cable is connected. Once the monitor has turned off, you can press the ON/OFF
button to turn the monitor on again and continue to take pictures while charging is in progress.
Time-lapse movies created at a size of [4K] may not display on some computer systems. More
information is available on our website.
129
Shooting automatically with a fixed interval
(Interval Shooting)
C
C
C
C
C
C