Monitor indication Possible cause/Corrective action
Y/M/D
The clock is not set.
Set the clock (P.28).
The internal temperature of the camera has risen due to sequential
shooting.
Turn off the camera and wait for the internal temperature to cool.
Internal camera
temperature is too
high.
Please wait for
cooling before
camera use.
The internal temperature of the camera has risen due to sequential
shooting.
Wait a moment for the camera to turn off automatically.
Allow the internal temperature of the camera to cool before resuming
operations.
Battery Empty
The battery is exhausted.
Charge the battery.
No Connection
The camera is not correctly connected to a computer, HDMI display, or
other devices.
Reconnect the camera.
Logging function
cannot be used at
this time.
The area of camera memory used for temporary storage of the log file
is full.
Insert a card or confirm that the current card is correctly inserted and
transfer to log file to the card.
The battery is exhausted.
Charge the battery.
The camera is connected to a television or other device via an HDMI
cable.
Disconnect the HDMI cable.
The USB-AC adapter is being used to supply power to the camera from
an electrical outlet while the battery is removed.
Insert the battery and unplug the USB-AC adapter from the outlet.
250
Error codes