Monitor indication Possible cause/Corrective action
(Solid)
The area of camera memory used for temporary storage of the log file
is full.
Insert a card or confirm that the current card is correctly inserted and
transfer to log file to the card.
The battery is exhausted.
Charge the battery.
The camera is connected to a television or other device via an HDMI
cable.
Disconnect the HDMI cable.
The USB-AC adapter is being used to supply power to the camera from
an electrical outlet while the battery is removed.
Insert the battery and unplug the USB-AC adapter from the outlet.
The clock is not set.
Set the clock and select a time zone.
252
Error codes
To Next Page
Loading...
Need help?
General
