4-7
4-1 Installation Conditions
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
4
System Design
Gearbox Installation Conditions
Using Another Company's Gearbox (Reference)
If the system configuration requires another company's Gearbox to be used in combination
with an Accurax G5 motor, select the Gearbox so that the load on the motor shaft (i.e., both
the radial and thrust loads) is within the allowable range. (Refer to "Characteristics"(P.3-3) for
details on the allowable loads for the motors.)
Also, select the Gearbox so that the allowable input rotation speed and allowable input torque
of the Gearbox are not exceeded.
To Next Page
Loading...