Omron ACCURAX G5 - Interface Monitor Setting Parameters

8-36
8-5 Interface Monitor Setting Parameters
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
8
Parameters Details
8-5 Interface Monitor Setting Parameters
Refer to "6-10 Sequence I/O Signal" (P.6-37)for more information on settings.
Pn400
Input Signal Selection 1
Setting range 0 to 00FFFFFFh Unit − Default setting 8553090 Power OFF and ON Yes
All
Pn401
Input Signal Selection 2
Setting range 0 to 00FFFFFFh Unit − Default setting 8487297 Power OFF and ON Yes
All
Pn402
Input Signal Selection 3
Setting range 0 to 00FFFFFFh Unit − Default setting 9539850 Power OFF and ON Yes
All
Pn403
Input Signal Selection 4
Setting range 0 to 00FFFFFFh Unit − Default setting 394758 Power OFF and ON Yes
All
Pn404
Input Signal Selection 5
Setting range 0 to 00FFFFFFh Unit − Default setting 4108 Power OFF and ON Yes
All
Pn405
Input Signal Selection 6
Setting range 0 to 00FFFFFFh Unit − Default setting 197379 Power OFF and ON Yes
All
Pn406
Input Signal Selection 7
Setting range 0 to 00FFFFFFh Unit − Default setting 3847 Power OFF and ON Yes
All
Pn407
Input Signal Selection 8
Setting range 0 to 00FFFFFFh Unit − Default setting 263172 Power OFF and ON Yes
All
Pn408
Input Signal Selection 9
Setting range 0 to 00FFFFFFh Unit − Default setting 328965 Power OFF and ON Yes
All
Pn409
Input Signal Selection 10
Setting range 0 to 00FFFFFFh Unit − Default setting 3720 Power OFF and ON Yes
All
Pn410
Output Signal Selection 1
Setting range 0 to 00FFFFFFh Unit − Default setting 197379 Power OFF and ON Yes
All
Pn411
Output Signal Selection 2
Setting range 0 to 00FFFFFFh Unit − Default setting 131586 Power OFF and ON Yes
All
Pn412
Not used
Setting range − Unit − Default setting - Power OFF and ON −
All
Pn413
Output Signal Selection 4
Setting range 0 to 00FFFFFFh Unit − Default setting 65793 Power OFF and ON Yes
All