Omron ACCURAX G5 - Using the Front Display

9-7
9-3 Using the Front Display
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
9
Operation
9-3 Using the Front Display
LED display (6 digits)
All LEDs will flash when an error occurs and
the window switches to the error display.
Shift key
Shifts the operating digit to the left.
Mode key
Switches between the following 4 modes.
• MONITOR mode
• PARAMETER SETTING mode
• AUXIARY FUNCTION mode
• PARAMETR WRITE mode
Increment and Decrement key
Increases/decreases the parameter number or data value.
Data key
Switches between the parameter and data displays,
and writes data.