Omron CPM1 Programming Manual

284
Conversion Instructions Section 5-19
Example The following example shows how to use NEGL(––) to find the 2’s comple-
ment of the hexadecimal value in IR 151, IR 150 (001F FFFF) and output the
result to HR 04, HR 03.
00000 LD 00000
00001 NEGL(––)
150
LR 03
000
Address Instruction Operands
NEGL(––)
150
LR 03
000
00000
0000
001F
FFE0
–
0000
FFFF
0001
S+1: IR 151 S: IR 150
R+1: LR 04 R: LR 03

Omron CPM1 Specifications

General

Model	CPM1
Manufacturer	Omron
Instruction Set	Basic and advanced instructions
Power Supply	100 to 240 VAC or 24 VDC
Communication	RS-232C
I/O Points	10, 20, 30, or 40 points depending on the model
Timers	Yes, multiple timers available
Counters	Yes, multiple counters available
Input Voltage	24V DC
Output Type	Relay or transistor
Number of I/O Points	10, 20, 30, 40
Communication Ports	RS-232C (optional)
Operating Temperature	0°C to 55°C
Storage Temperature	-20°C
Humidity	10% to 90% (non-condensing)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
Program Memory	2048 steps (2K steps)