76
Installation Section 5-2
This completes installation of the USB driver for the G9SP Configurator.
Confirmation
Check that the driver has been installed correctly after the installation.
1,2,3...
When Installation Fails
1,2,3... 1. Display the Device Manager on the computer.
If OMRON-PLC is displayed in other devices, installation of the USB driver
has failed.
5. Click the Browse Button un-
der Search for driver soft-
ware in this location. Specify
the directory where the USB
driver was saved (\Driv-
ers\USB) as the location to
search and click the Next
Button.
6. The Windows Security Dia-
log Box will be displayed.
Click the Install Button.
7. The driver will be installed.
8. When the driver installation
is completed normally, the
installation completed dialog
box will be displayed. Click
the Close Button.
1. Right-click Computer on the Start Menu, and then select Manage.
2. Select the Device Manager on the navigation pane.
3. If the OMRON G9SP Device
is displayed in the list of uni-
versal serial bus controllers,
then the USB driver has
been installed correctly.
To Next Page
Loading...
