EasyManua.ls Logo

Omron G9SP-N20S - Regulations and Standards; Compliance with EC Directives

Omron G9SP-N20S
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xxii
Regulations and Standards
The G9SP-series Controller has obtained certification for the following standards.
*1 The G9SP-series Controller (version 1.1 or later) and the Expansion I/O Units have been certified for
the KOSHA S Mark.
Using a G9SP-series Controller enables building a safety control system that satisfy the following:
Requirements for SIL 3 (Safety Integrity Level 3) in IEC 61508, IEC/EN 62061,
Safety Standard for Safety Instrumented Systems (Functional Safety of Electrical/
Electronic/Programmable Electronic Safety-related Systems)
Requirements for PLe (Performance Level e) and for safety category 4 in EN
ISO13849-1
EMC Directive (2014/30/EU)
Machinery Directive (2006/42/EC)
EMC Directive
OMRON electrical devices are built into other components or equipment. OMRON therefore pursues
compliance with the related EMC standards so that they can be more easily built into other devices or
the equipment.*
OMRON cannot confirm compliance in the customer's actual application, however, because the cus-
tomer may use a variety of components and equipment, and EMC performance depends on the configu-
ration, wiring, and arrangement of the equipment and control panel into which a product applicable to
EC Directives is incorporated. Therefore, whether the products conform to the standards in the system
used by the customer must be checked by the customer.
* Applicable EMC (Electromagnetic Compatibility) standards are as follows: EN
61000-6-2 for EMS (Electromagnetic Susceptibility) and EN 61000-6-4 for Electro-
magnetic Interference (10-m regulations applied for EN 61000-6-4 radiated emis-
sion).
Certifying body Standards
TÜV Rheinland EN ISO 13849-1:2015
EN ISO 13849-2:2012
IEC 61508 parts 1-7:2010
EN 62061:2005+A1:2013+A2:2015
IEC 61131-2:2007
EN ISO 13850:2015
EN 60204-1:2006+A1:2009
EN 61000-6-2:2005
EN 61000-6-4:2007+A1:2011
NFPA 79-2015
ANSI RIA 15.06-2012
ANSI B11.19-2010
ANSI/UL 1998:2013
UL UL508 CSA22.2 No.142
KOSHA
•S Mark
*1
Others CE Marking
C-Tick mark
Compliance with EC Directives
Applicable Directives
Concepts

Table of Contents

Related product manuals