1-4-4
i4-550L (350 mm Z)
The i4-550L (350 mm Z) configuration has a reach of 550 mm and a z-axis stroke of 350 mm.
1-4-5
Mounting and Cabling Options
The robot has a table mount flange and a wall mount flange integrated into the base. This allows the
robot to be table-mounted or wall-mounted without the need for additional brackets or adapters.
The rear / bottom Primary Interface Panel orientation options allow cables to exit through the mounting
surface or parallel to the mounting surface as shown below.
1 Overview
1-13
i4L Robots User's Manual (I658)
1-4 Robot Configurations
1
1-4-4 i4-550L (350 mm Z)
To Next Page
Loading...
