46 LD-250 Platform User's Guide 20472-000 Rev B
3.2 Transport and Storage
3.2 Transport and Storage
LD-250 Shipping and Storage
Ship and Store the LD-250 only under the conditions described in this section.
IMPORTANT: To prevent damage to electronic safety components, and to
ensure the safe operation of the LD-250, observe the shipping and storage instruc-
tions in this section.
Ship and store the LD-250 without its battery installed in:
l
A temperature-controlled environment, ranging from -20 to 60°C (-4 to 140°F). The
recommended humidity range is 5% to 95%, non-condensing.
l
Its original shipping carton, which is designed to prevent damage from shock and vibra-
tion in transit. Protect the crate from excessive shock and vibration.
Use only a forklift, pallet jack, or similar device to move the shipping crate.
Keep the LD-250 in an upright position in a clean, dry area that is free from condensation. Do
not lay the crate on its side or any other non-upright position. This could damage the LD-250.
Figure 3-1 LD-250 Shipping Carton
The crate with pallet for the LD-250 has the following physical characteristics:
l Size:
o
132 cm (51.8 inches) wide (A)
o
105 cm (42.4 inches) high (B)
o
88 mm (34.6 inches) deep (C)
l
Shipping weight 196.6 kg (433 lb).
l
Material - Corrugated fiberboard carton over a plywood and wood pallet.
To Next Page
Loading...
