EasyManua.ls Logo

Omron LD-250 - Setting up Wireless Ethernet

Omron LD-250
207 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70 LD-250 Platform User's Guide 20472-000 Rev B
4.1 Settings and Configuration
6.
Enter 1.2.3.X as the IP address and 255.255.255.0 as the Subnet mask.
(Where x is any number 1 through 255 excluding 4.)
7.
Click OK twice to exit both Properties dialogs, and then close the Network Connections
screen.
Test the TCP/IP port connection by accessing the SetNetGo Web UI:
1.
Open a Web browser on the PC and enter https://1.2.3.4 as the URL.
2.
If prompted to accept security certificates, confirm that you accept them.
3.
Verify that the SetNetGo Web UIopens.
Setting Up Wireless Ethernet
A single LD-250 can operate without a wireless network. For example, if it is the sole AMR in
a workspace and it does not need to share the workspace with other AMRs. However, if you
have more than one AMR sharing the same workspace, you must manage them as a fleet.
Fleet management requires continuous wireless network access. For more information, see:
Fleet Manager for Multi-AMR Coordination on page 187.
Before you configure wireless Ethernet on your LD-250, contact your network administrator to
confirm the IP, radio, and security settings.
Use one of the following methods to access the SetNetGo Web UI:
l
Use the SetNetGo tab in the MobilePlanner software. See the Fleet Operations Work-
space Core User's Guide.
l Open a Web browser on your PC and enter the URL: https://1.2.3.4, to connect directly to
the SetNetGo Web UI on your LD-250. This enables your network administrator to set
up the network for you, without using a licensed instance of MobilePlanner.
Set Up a Wireless Network on the Management Interface
To set up the wireless network, you need the following resources. Discuss this with your net-
work administrator and use the following the table as a worksheet to gather the necessary
data.
Description Your Data
A static IP address
The netmask for your network
Gateway
DNS server(s)
SSID for the AMR network
Mode for the network The only option is: Infrastructure
Radio Mode 802.11a 802.11b/g 802.11a/g/b
Channel Set
Wireless Watchdog IP Address

Table of Contents

Other manuals for Omron LD-250

Related product manuals