Chapter 4: Configuration
Callout Description
A Minimum specification Cat 5 Ethernet Cable.
B Microsoft Windows PC with Ethernet LANport.
C LD-250 Maintenance Ethernet port (under a door in the rear skin).
2.
In the Windows desktop Open or Search box (or at a command prompt) type the fol-
lowing command and press Enter:
ncpa.cpl
This command opens the Network Connections screen:
Figure 4-2 Network Connections Screen.
3.
Right-click on the Ethernet N or LAN Connection.
4.
Click Properties, and then double-click the Internet Protocol Version 4 connection item
to open its Properties window.
Figure 4-3 Dialogs for the Ethernet Properties
5.
Click the radio button next to Use the following IP address.
20472-000 Rev B LD-250 Platform User's Guide 69
To Next Page
Loading...
