103
Engrave Submenu
6. Touch Screen Operations
Parameters Options Functions/Meanings
X start speed (mm/s) Numerical
Sets the speed at which the laser head starts along the X
axis.
Y start speed (mm/s) Numerical
Sets the speed at which the laser head starts along the Y
axis.
X Acc (mm/s
²
) Numerical Sets the laser head’s acceleration along the X axis.
Y Acc (mm/s
²
) Numerical Sets the laser head’s acceleration along the Y axis.
Line feed speed(mm/s) Numerical
Sets the speed at which the laser head travels between
lines.
Engraving factor* Numerical Sets the overall speed of the laser head.
*This parameter was set at the factory to match the Line feed speed and does
need adjustment. If you have changed this by accident, contact the customer
service to reinstate it or for customizing them.
To Next Page
Loading...
