104
Cut Submenu
Parameters Options Functions/Meanings
Fast feed speed Numerical
Sets the speed of the laser head when not firing laser
beams.
Fast feed acc(mm/s
²
) Numerical
Sets the acceleration of the laser head when not firing laser
beams.
Corner spd
¹
Numerical Sets the speed of the laser head when making sharp turns.
Corner acc(mm/s
²
) Numerical
Sets the acceleration of laser head when making sharp
turns.
Cutting acc(mm/s
²
) Numerical Sets the acceleration of the beaming laser head.
Fast feed delay(ms)
²
Numerical
Sets the time the laser head rests for after travelling without
beaming.
•
¹
If your engraving design has a lot of serrated or zigzag patterns, set the
parameter at a value that best suits your design. Practice on scrap materials
first.
•
²
When set to zero, the laser head doesn’t rest after traveling without beaming.
When set to a certain value, the laser head slows down upon the completion
of traveling without beaming and rest for the set milliseconds.
To Next Page
Loading...
