OPTIMedical OPTI CCA-TS - Page 114

Operator’s Manual – OPTI CCA-TS 6-9
6 MAINTENANCE
7. In the <New Gas Bottle?> screen (Fig. 6-22),
press
to conrm the installation of a
new gas bottle.
The analyzer will initiate a purge of the system,
which will be indicated on the status bar on the
bottom of the screen (Fig. 6-23).
NOTE: Ifyouneedtoremovethegasbottleand
reinstallit,respond attheprompt
<New Gas Bottle?>.Youwillthenbe
promptedtoenterthenumberofweeksin
serviceusingthenumerickeypad
(Fig.6-24).Hereyoumayreferbacktothe
installationdate,whichwasrecordedonthe
gasbottle.
8. The unit will then return to the <Ready> screen
(Fig. 6-25).
Fig. 6-22 New Gas Bottle
Fig. 6-24 Enter Number of Weeks in use
Fig. 6-23 Purging Gas
Fig. 6-25 Ready screen
New Gas Bottle?
Gas
Yes
No
New Gas Bottle?
Gas
Yes
No