OPTIMedical OPTI CCA-TS - Checking the Ethernet Interface

7-28 Operator’s Manual – OPTI CCA-TS
7 DIAGNOSTICS AND TROUBLESHOOTING
7.2.21 Checking the Ethernet Interface
The purpose of this test is to check for proper
functioning of the Ethernet interface.
From the <Ready> display, press <System
Manager -> <Diagnostics>.
• Select the <Tests> tab.
•
Press <Ethernet> to start the test (Fig. 7-41).
• The system will send out data and check if they
are received (Fig. 7-42).
• Press
to return to the <Tests> screen.
Fig. 7-41 Ethernet
Fig. 7-42 Ethernet Test