OPTIMedical OPTI CCA-TS - Selecting Which Calculated Parameters Are Printed

Operator’s Manual – OPTI CCA-TS 3-11
3 CUSTOMIZATION
3.3.2.4 Selecting Which Calculated Parameters Are Printed
With this menu you can select the calculated
parameters to be printed on the patient report.
The printout order is xed; however, calculated
parameters may be selected for inclusion in or
exclusion from the printout.
NOTE: The display will always let you view all
available calculated parameters.
1. From the <Ready> display, select
<System Manager> and <Setup>.
2. In the <System Setup> menu, press
<Calculated Parameters> (Fig. 3-21).
3. Select the cassette type (Fig. 3-22).
4. Select the parameters to be printed.
5. Press to accept the changes.
6. Press to return to the <Setup> screen
or
to return to <Ready>.
Fig. 3-21 Select Calculated
Parameters
Fig. 3-22 Select Parameters