OPTIMedical OPTI CCA-TS - Consumables

Operator’s Manual – OPTI CCA-TS 1-7
1 INTRODUCTION
Next to the battery pack is the power connector
where you can connect the OPTI CCA-TS to an
external power supply (Fig. 1-11).
The On/Off switch is located on the left side of the
unit next to the power connector (Fig. 1-11).
NOTE: Allow a 30 second delay when switching the
power ON/OFF.
The self-contained OPTI Sensor Cassette has an
integral valve with a reservoir. The valve seals
away the sample after measurement, allowing safe,
clean sample disposal (Fig. 1-12).
The sample llport is contained in the OPTI
Cassette and projects from the chamber for easy,
automatic sampling. It includes a removable
syringe adapter for sampling with a syringe.
For sampling with a capillary, simply remove the
adapter (Fig. 1-13).
NOTE: The syringe adapter may be removed while
the cassette is inside the SMC.
NOTE: DO NOT INJECT the sample.
It will be aspirated automatically.
Fig. 1-12 OPTI Sensor Cassette
Fig. 1-13 Sample Fillport and
Syringe Adapter
OPTI Sensor Cassette
Sample Fillport and
Syringe Adapter
1.5 Consumables
Fig. 1-11 Power Connector and On/Off Switch
Power Connector and
On/Off Switch