Operator’s Manual – OPTI CCA-TS 3-1
3 CUSTOMIZATION
Your OPTI™ CCA-TS analyzer is shipped preset to easily perform sampling operations.
Through the touch screen you can enter patient data and initiate printing of patient, QC and
calibration reports, as well as enter additional information to tailor the instrument’s performance
to match the particular needs of your lab.
For safety and security the OPTI CCA-TS customization can be protected by a security code.
The analyzer’s programming or existing parameters can then be changed only by entering the
correct security code.
All system setup selections entered will reside in the instrument memory even after the system
power is turned off.
3.1 Data Manager
This menu allows you to print out Measurement/Diagnostics Reports and Statistics.
It also provides you with the ability to export information if connected to a computer.
You can nd procedures for printing information in Chapter 4 “Calibration and Quality Control”
and Chapter 5 “Patient Testing”.
3.2 Setting Time and Date
1. In the main menu, press <System Manager>
(Fig. 3-1) to access the <System> menu.
•
Press <Time and Date> (Fig. 3-2).
• Enter the password (factory setting 404) when
prompted to access the <Time and Date>
screen (Fig. 3-3).
Fig. 3-1 Select System Manager Fig. 3-2 Select Time and Date Fig. 3-3 Time and Date
To Next Page
Loading...