Symbol Defi nitions
The symbols described below are used on the packaging of OPTI™ CCA-TS related products.
Symbol Explanation
Attention Symbol – Refer to the Operator’s Manual or Service Manual
for further instructions. This symbol is located on the inside of the
instruments and product packaging.
Expiration / Use By Symbol – Product to be used by the expiration
date indicated to the right of this symbol. This symbol is located on all
consumables, which are controlled via an expiration or use by date.
Batch Code Symbol – Manufacturing lot number is located to the
right of this symbol. This symbol is located on all products, which are
controlled via a lot number.
Do Not Re-use Symbol – Identifi es products which are not to be
used for more than the specifi ed period of time as defi ned in the
product instructions. This symbol is located on all applicable product
packaging.
Recycle Plastic Symbol - Identifi es the clear plastic material
(polyethylene terephthalate glycol) used in the packaging of the
product. Containers identifi ed with this symbol can be considered
recyclable. This symbol is located on all applicable product packaging.
WEEE-Symbol - This product complies with WEEE Directive
2002/96/EC which mandates the treatment, recovery and recycling of
electric and electronic equipment.
To Next Page
Loading...