OPTIMedical OPTI CCA-TS - Customizing Patient Information; Selecting Which Patient Information Is Requested and Printed

Operator’s Manual – OPTI CCA-TS 3-7
3 CUSTOMIZATION
3.3.2 Customizing Patient Information
3.3.2.1 Selecting Which Patient Information is Requested and Printed
In this function you can dene which patient
information is requested during, as well as printed
after, each measurement.
1. From the <Ready> display, select
<System Manager> and <Setup>.
2. In the <System Setup> menu, press
<Patient Entry> (Fig. 3-13).
3. In the <Info 1> screen, select the options to be
enabled (Fig. 3-14).
4. Select <Optional> or <Required> for:
Patient ID
Operator ID
Accession Number
5. Other options to be selected are:
Temperature
Sex
DOB
tHb Type
6. Press the <Info 2> tab to access and enable the
following parameters (Fig. 3-15).
Puncture Site Liter Flow
Bypass TVOL(VT)
Sample Type PS
O
2
Mode PEEP
I/E Ratio Rate (f)
Vent Mode CPAP
Pplat User dened eld
MVOL(VE) Bilevel Pressure
PIP tHb Prompt
Fig. 3-13 Select Patient Entry
Fig. 3-14 Patient Info 1
Fig. 3-15 Patient Info 2