3-28 Operator’s Manual – OPTI CCA-TS
3.3.3.9 Selecting a Language
This menu lets you choose the language you want
the OPTI CCA-TS to use for displays and printouts.
1. From the <Ready> display, select
<System Manager> and <Setup>.
2. In the <System Setup> menu, press the
<Miscellaneous> tab and then <Language>
(Fig. 3-52).
3. Select the desired language (Fig. 3-53).
4. Press to accept the changes.
5. Press to return to the <Setup> screen
or
to return to <Ready>.
Fig. 3-52 Select Language
Fig. 3-53 Select Language
In the <Maintenance> menu (Fig. 3-51), you can
select <Replace Pump Reminder> to alert you
when the peristaltic pump needs replacement.
If you enable the option <Cleaning Reminder>,
the system will alert you when weekly or monthly
cleaning is due. Select <Monthly> cleaning if the
analyzer is not used weekly. Refer to Chapter 6 for
maintenance procedures.
Fig. 3-51 Maintenance Options
To Next Page
Loading...