OPTIMedical OPTI CCA-TS - Index

Operator’s Manual – OPTI CCA-TS I-1
INDEX
INDEX
A
Accession No 3-7, 5-9
Accessories 8-14, 9-2
Alarm limits
setting 3-11
Alveolar-arterial oxygen difference
8-9
calculation A-12
reference ranges A-5
temperature corrected A-13
Analytes
measurement ranges 1-1, A-1
reporting units 1-1
Analyzer
components 1-3
customization 3-1
intended use 1-1
setup 2-2
Anticoagulants
accepted types 5-1, 8-3
Aspiration
patient sample 5-7
Audible alarm (Beep)
adjustment 3-21
B
Backlight AutoOff 3-22
Bar code
scanner, cleaning 7-6
scanner, description 1-5
scanner, troubleshooting 7-34
test 7-17
Barometric pressure
entering 3-20
range A-1
unit conversion A-8
verifying 7-14
Base excess 8-9
calculation A-9, A-10
reference ranges A-5
Battery pack
installing 2-2
rechargeable 1-6
Battery save mode 3-22
Battery voltage
checking 7-15
Bicarbonate
actual 8-9
actual, reference ranges A-5
acutal, calculation A-9
standard 8-9
standard, calculation A-9
standard, reference ranges A-5
Blood
collection and handling 5-1, 8-3
volume required 8-6
Buffer bases 8-9
calculation A-10
reference ranges A-5
BUN (Urea)
Clinical signicance BUN-1
Correlation to Other Methods
BUN-3
Interferences BUN-2
Linearity BUN-2
Measurement principle BUN-1
Measurement range BUN-1
Reference intervals BUN-2
References BUN-3
Reproducibility BUN-2
SRC Limit Values BUN-2
C
Calcium. See Ionized Calcium
Calculated parameters 3-10, A-7
Calculated values 8-9, A-4
Calibration 4-1, 8-9
gas bottle 8-15
report, setup 3-24
tHb, troubleshooting 7-33
touch screen 7-23
Capillary tubes 8-3
attach sample 5-7
sample collection 5-2, 5-10, 8-3
Carbon dioxide partial pressure
(PCO2)
clinical signicance PCO2-1
correlation to other methods PCO2-
3
linearity PCO2-3
measurement principle PCO2-1
measurement range PCO2-1
precision and recovery PCO2-3
reference intervals PCO2-1
references PCO2-3
reproducibility PCO2-1
SRC limit values PCO2-1
temperature corrected A-12
Chloride (Cl-)
Clinical signicance Cl-1
Correlation to Other Methods Cl-3
Interferences Cl-2
Linearity Cl-2
Measurement principle Cl-1
Measurement range Cl-1
Reference intervals Cl-2
References Cl-3
Reproducibility Cl-2
SRC Limit Values Cl-1
Classications A-7
ComfortSamplers 5-2, 8-4
Communications
setting up 3-23
Conguration report 7-32
Consumable items 9-2
Control Reports
printing 4-14
Conversion
units A-8
Cooling fan
checking 7-15
Correlation factors
setting up 3-13
Customization 3-1
D
Data
export 4-15
management A-6
manager 3-1
patient, enter 5-9
Daylight savings time
setting 3-2
Diagnostic reports
control 7-30
patient 7-28
SRC 7-29
Diagnostics 7-1, 7-12
Dimensions and weight A-7