OPTIMedical OPTI CCA-TS - Page 269

I-2 Operator’s Manual – OPTI CCA-TS
INDEX
Display test 7-22
E
Error displays 7-1
Error report 7-31
Ethernet interface
test 7-27
F
Factory settings
checking 7-17
G
Gas bottle
changing 6-9
description 1-8
installing 2-5
Gas I/O Ports
replacing 6-8
Gas pressure
checking 7-13
Gas test 7-24
Gas valve
checking 7-16
Glucose (Glu)
Clinical signicance Glu-1
Correlation to Other Methods
Glu-4
Interferences Glu-2
Linearity Glu-3
Measurement principle Glu-2
Measurement range Glu-2
Reference intervals Glu-2
Reproducibility Glu-3
SRC Limit Values Glu-2
H
Hematocrit 8-9
calculation A-13
reference ranges A-5
Hemoglobin oxygen saturation
8-9, A-10
calculation A-10
reference ranges A-5
Hemoglobin oxygen saturation
(SO2%) THB/SO2-1
clinical signicance THB/SO2-1
measurement principle THB/SO2-2
measurement range THB/SO2-2
reference intervals THB/SO2-2
Hydrogen ion concentration 8-9
calculation A-8
reference ranges A-5
temperature corrected A-12
I
Input values 8-6, A-2
Installation. See Setup
Interface
Ethernet, test 7-27
RS232, test 7-20
Interferences 8-13
Ionized Calcium (Ca++)
clinical signicance Ca-1
correlation to other methods Ca-3
interferences Ca-2
linearity Ca-3
measurement principle Ca-1
measurement range Ca-1
normalized A-13
reference intervals Ca-2
reference ranges A-5
references Ca-3
reproducibility Ca-2
unit conversion A-8
L
Lactate (B-Lac Cassette)
Clinical signicance Lac-1
Correlation to Other Methods
Lac-4
Interferences Lac-2
Linearity Lac-3
Measurement principle Lac-1
Measurement range Lac-1
Reference intervals Lac-2
References Lac-4
Reproducibility Lac-3
SRC Limit Values Lac-1
Lactate setup 7-25
Language
selecting 3-26
LEDs
checking 7-14
Limitations 8-12
M
Mains supply A-6
Maintenance 6-1
annual 6-7
daily 6-1
log C-1
quarterly 6-1
weekly 6-1
Maintenance report 7-32
Manuals 9-2
Menu structure B-1
Model and serial numbers 1-6
N
Normalized ionized calcium
reference ranges A-5
Normal ranges
setting 3-11
O
Operating altitude A-1
Operating parameters A-2
Operating principles 8-1
Operation
analyzer 8-2
Operator ID 3-7, 5-9
secure, setting up 3-19
Optics test 7-19
Overvoltage category A-6
Oxygen content 8-9
calculation A-11
reference ranges A-5
Oxygen partial pressure (PO2)
clinical signicance PO2-1
correlation to other methods PO2-3
linearity PO2-3
measurement principle PO2-1
measurement range PO2-1
precision and recovery PO2-2
references PO2-3
reproducibility PO2-2
SRC limit values PO2-1
temperature corrected A-12
P
P50 8-9
calculation A-11
reference ranges A-5
Parameters
blanking 3-9
measurement ranges 1-1, A-1
reporting units 1-1
Password
setting up 3-16