OPTIMedical OPTI CCA-TS - Page 270

Operator’s Manual – OPTI CCA-TS I-3
INDEX
Patient
data, enter 5-8
information, customizing 3-7
report, printing 5-14
testing 5-1
Patient ID 3-7, 5-9
PCO2 (Dry Sensor - B-Lac Cassette)
PCO2-B-1
Clinical signicance PCO2-B-1
Correlation to Other Methods
PCO2-B-4
Interferences PCO2-B-2
Linearity PCO2-B-3
Measurement principle PCO2-B-1
Measurement range PCO2-B-1
Reference intervals PCO2-B-1
References PCO2-B-4
Reproducibility PCO2-B-3
SRC limit values PCO2-B-1
Peristaltic pump cartridge
description 1-5
replacing 6-7
pH pH-1
clinical signicance pH-1
measurement principle pH-1
measurement range pH-1
SRC limit values pH-1
temperature corrected A-12
pH (Dry Sensor - B-Lac Cassette)
pH-B-1
Clinical signicance pH-B-1
Correlation to Other Methods
pH-B-4
Interferences pH-B-2
Linearity pH-B-3
measurement principle pH-B-1
measurement range pH-B-1
Reference intervals pH-B-2
References pH-B-4
Reproducibility pH-B-3
SRC Limit Values pH-B-2
PO2 (Dry Sensor - B-Lac Cassette)
PO2-B-1
Clinical signicance PO2-B-1
Correlation to Other Methods PO2-
B-4
Interferences PO2-B-2
Measurement principle PO2-B-1
Measurement range PO2-B-1
Reference intervals PO2-B-1
References PO2-B-4
Reproducibility PO2-B-3
SRC Limit Values PO2-B-1
Pollution degree A-1
Potassium (K+) K-1
clinical signicance K-1
correlation to other methods K-3
interferences K-2
linearity K-2
measurement principle K-1
measurement range K-1
reference intervals K-2
references K-3
reproducibility K-2
SRC limit values K-1
Principles of operation 1-1
Principles of procedure 8-1
Printer
description 1-5
test 7-18
Printer paper
changing 6-11
installing 2-4
Prociency testing 4-2
Pump ow
checking 7-21
Pump motor
test 7-22
Q
QC
lockouts 3-16, 3-17
overview 4-1
recommendations 4-3
results 4-13
setup 4-4
QC Sample
running 4-8
Quality control 4-1, 8-10
R
Reference intervals 8-11
Report formats D-1
Reports
Conguration D-6
Controls Measurement D-4
Controls Statistics D-5
diagnostic 7-28
Error D-8, D-9
Maintenance D-7
Patient D-1
SRC Measurement D-2
SRC Statistics D-3
Routine cleaning
performing 6-12
RS232 interface
pin conguration A-6
test 7-20
S
Sample
collection devices 5-1, 8-3
handling 5-1
handling and storage 5-3, 8-4
preparation 5-4
requirements 5-1, 8-3
whole blood 5-4
Sample llport
description 1-7
Sample measurement chamber (SMC)
description 1-4
Secure Operator ID 3-16
setting up 3-19
Sensor cassette
description 1-7
Setup
analyzer 2-1
Sodium (Na+) Na-1
clinical signicance Na-1
correlation to other methods Na-3
interferences Na-2
measurement principle Na-1
measurement range Na-1
reference intervals Na-2
references Na-3
SRC limit values Na-1
Spare parts 9-3
Specimen collection and handling
5-1, 8-3
SRC Measurement
running 4-4
SRC Results
printing 4-7
Standard pH 8-9
calculation A-8
reference ranges A-5
Standard Reference Cassette (SRC)
setting up 3-3
Status light
description 1-4
Supplies 9-1
Symbol denitions VII
Syringe adapter
description 1-7, 8-14