3-22 Operator’s Manual – OPTI CCA-TS
3.3.3.3 Beep Adjustment
This option lets you adjust the volume of the audible
alarm (Beep).
1. From the <Ready> display, select
<System Manager> and <Setup>.
2. In the <System Setup> menu, press the
<Miscellaneous> tab and then <Hardware>.
3. In the <Settings> screen, select
<Beep Enable> (Fig. 3-39).
4. Select <High> or <Low> for <Beep
Volume>.
5. Press to accept the changes.
6. Press to return to the <Setup> screen
or
to return to <Ready>.
Fig. 3-39 Enable Beep
To Next Page
Loading...