3-2 Operator’s Manual – OPTI CCA-TS
2. In the <System -> Time and Date> screen
(Fig. 3-4), press
to leave the default
time and date setting unchanged, or press the
button to call up a numeric keypad that
can be used to change the time and date setting.
3. To change the <Time Format> from
<12-hour> time units to <24-hour> time units,
press the respective radio button.
4. Select <Automatically Adjust for Daylight
Savings> if you want the system clock to
change to Daylight Savings Time automatically.
5. To change from Standard Time to Daylight
Savings Time manually, select the option
<Daylight Savings Enable>.
6. Press
to accept the changes.
7. Press to return to the <System> screen
or
to return to <Ready>.
3.3 Setup
Setup menus let you set up quality control materials,
program the setup of the printed reports, set up
system security and customize several other system
features.
1. From the <Ready> display, press
<System Manager> to access the <System>
menu.
2. Press <Setup> to select this function
(Fig. 3-5).
3. Enter the password 404 to access the setup
functions.
NOTE: You may not be prompted to enter a
password if the password was previously
disabled (see Section 3.3.3.4.1).
NOTE: If the factory-set password was changed,
enter the currently valid password.
Fig. 3-4 Time and Date
Fig. 3-5 Setup
To Next Page
Loading...