OPTIMedical OPTI CCA-TS - Configuration Report; Maintenance Log

Operator’s Manual – OPTI CCA-TS 7-33
7 DIAGNOSTICS AND TROUBLESHOOTING
This printout reports all settings such as QC
ranges, reference limits, correlation factors, patient
information, printout settings etc.
• To print a conguration report, select
<Conguration> in the <Data> screen
(Fig. 7-55).
• Press
to return to the <Data> screen.
NOTE: After initial setup, a conguration report
should be printed and kept in a safe place
for later reference.
7.2.22.5 Conguration Report
Fig.7-55CongurationReport
This printout reports all logged maintenance events.
• To print a maintenance log, select
<Maintenance> in the <Data> screen
(Fig. 7-55).
• Press
to print the maintenance log
(Fig. 7-56).
• Press
to delete the maintenance
database.
• Conrm your choice by pressing
in
the <Delete the Maintenance Log?> screen
(Fig. 7-57).
• Press
to return to the <Data> screen.
7.2.22.6 Maintenance Log
Fig. 7-56 Maintenance Log
Yes No
Maintenance
Delete the Maintenance Log?
Fig. 7-57 Delete Maintenance Log