OPTIMedical OPTI CCA-TS - Miscellaneous; Setting up Security

Operator’s Manual – OPTI CCA-TS 3-17
3 CUSTOMIZATION
The OPTI CCA-TS has three types of security:
1.
A Password Function to limit access to various
system functions (See section 3.3.3.1.1).
2.
QC Lockouts to help hospitals meet their QC
policies (See section 3.3.3.1.2).
3.
A Secure Operator ID function to limit access
to analyzer to properly trained, authorized users
(See section 3.3.3.1.3).
•
From the <Ready> display, select
<System Manager> and <Setup>.
•
In the <System Setup> menu, press the
<Miscellaneous> tab, and select <Security>
(Fig. 3-33).
3.3.3.1.1 Setting Up a Password
The OPTI CCA-TS has a password function which,
when activated, will deny access to the setup menus
and certain database functions. The correct password
will have to be entered to grant access to these
menus and functions. The password is especially
useful to ensure that only authorized operators
can alter customized settings. The factory default
password is 404. The factory-set password can be
changed to any number between 0 and 9999 (up to 4
digits).
1. Select <Password Enable> in the
<Security> menu (Fig. 3-34). You will then
be able to enter a number (1-4 digits) in the
<Setup PW> eld.
2. Press to enter the numbers and press
to accept the changes.
CAUTION:
Make sure the password is kept
condential and in a safe place.
Passwords can not be retrieved!
3. Press to return to the <Setup> screen
or
to return to <Ready>.
Fig. 3-33 Select Security
Fig. 3-34 Enter Password
3.3.3 Miscellaneous
3.3.3.1 Setting up Security