3-16 Operator’s Manual – OPTI CCA-TS
5. Press the <Parameters> tab to go to the next
screen (Fig. 3-32), and select the units for the
remaining parameters.
Your OPTI CCA-TS has been factory preset to the
following units:
•
Baro/Partial Pressure mmHg
• Temperature
o
C
•
Resolution Low
• tHb g/dL
• Electrolytes mmol/L
• Glucose mmol/L
• BUN mg/dL
• Lac mmol/L
NOTE: The OPTI CCA-TS automatically
recalculates the units stored in the database
to the changed unit value.
6. Press to accept the changes.
7. Press to return to the <Setup> screen
or
to return to <Ready>.
Fig. 3-32 Select Units
To Next Page
Loading...